Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 38 - HAND AND PORTABLE POWERED TOOLS
HAND TOOL PROVISIONS
Section R. 408.13845 - Chain falls and hoist and pullers; capacity
Universal Citation: MI Admin Code R. 408.13845
Current through Vol. 24-16, September 15, 2024
Rule 3845.
(1) A chain fall or hoist and puller shall be used at not more than its rated capacity.
(2) The capacity of a chain fall or hoist and puller shall be permanently labeled or marked on it.
(3) An accessory, such as a chain or cable used to secure or support a chain fall or hoist and puller, shall have a capacity of not less than the chain fall or hoist and puller.
(4) An object subject to a lift or pull by a chain fall shall have the capacity to absorb the lift or pull without creating a hazard to an employee in the area.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.