Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 33 - PERSONAL PROTECTIVE EQUIPMENT
FOOT AND TOE PROTECTION
Section R. 408.13383 - Criteria for protective footwear

Universal Citation: MI Admin Code R. 408.13383

Current through Vol. 24-16, September 15, 2024

Rule 3383.

(1) Protective footwear shall comply with any of the following consensus standards:

(a) ASTM F-2412 "Standard Test Methods for Foot Protection," 2005 edition, as adopted in R 408.13301a.

(b) ASTM F-2413 "Standard Specification for Performance Requirements for Protective Footwear," 2005 edition, as adopted in R 408.13301a.

(c) ANSI Z-41 "American National Standard for Personal Protection -- Protective Footwear," 1999 edition, as adopted in R 408.13301a.

(2) Protective footwear that an employer demonstrates is at least as effective as protective footwear that is constructed in accordance with 1 of the consensus standards adopted in subrule (1) of this rule, shall be considered to be in compliance with the requirements of this rule.

An obvious error in R 408.13383 was corrected at the request of the promulgating agency, pursuant to Section 56 of 1969 PA 306, as amended by 2000 PA 262, MCL 24.256. The rule containing the error was published in Michigan Register, 2014 MR 7. The memorandum requesting the correction was published in Michigan Register, 2014 MR 13

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.