Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 33 - PERSONAL PROTECTIVE EQUIPMENT
FACE SHIELDS
Section R 408.13340 - Purposes and uses
Universal Citation: MI Admin Code R 408.13340
Current through Vol. 24-16, September 15, 2024
Rule 3340.
(1) The devices described in R 408.13340 to R 408.13347 of this part are designed to provide protection to the front part of the head, including forehead, cheeks, nose, mouth, and chin, and to the neck, where required, from flying particles and sprays of hazardous liquids, and to provide filter protection where required. Such devices shall be worn over suitable basic eye protection devices.
(2) Typical uses for face shields include, but are not limited to, the following situations:
(a) Woodworking operations where chips and
particles fly.
(b) Metal machining
causing flying particles.
(c)
Buffing, polishing, wire brushing, and grinding operations causing flying
particles or objects.
(d) Spot
welding.
(e) Handling of hot or
corrosive materials.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
