Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 33 - PERSONAL PROTECTIVE EQUIPMENT
EYE PROTECTORS
Section R. 408.13360 - Eyecup lenses and retaining rings

Universal Citation: MI Admin Code R. 408.13360

Current through Vol. 24-16, September 15, 2024

Rule 3360.

(1) An eyecup shall be provided with a rigidly constructed lens retaining ring of metal or of plastic designed to accommodate lenses and to permit their ready removal and replacement without damage to the eyecup or to the lenses and without the use of tools. The ring shall provide a complete clamping action against the lens. Lens retainers for welder's and cutter's models shall accommodate a filter lens, fiber gasket, and cover lens.

(2) A filter lens shall be marked with the shade designation and a permanent and legible marking by which the manufacturer may be readily identified. A glass filter lens, when treated for impact-resistance, shall also be marked with the letter "H."

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.