Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 33 - PERSONAL PROTECTIVE EQUIPMENT
EYE PROTECTORS
Section R. 408.13356 - Eyecup goggles; types and models
Universal Citation: MI Admin Code R. 408.13356
Current through Vol. 24-16, September 15, 2024
Rule 3356.
(1) Eyecup goggles shall be of 2 types as follows:
(a) Cup-type goggles designed to be worn by
individuals who do not wear corrective spectacles.
(b) Cover cup-type goggles designed to fit
over corrective spectacles.
(2) The 2 types of eyecup goggles are subdivided into the following classes:
(a)
Chipper's models providing impact protection against flying objects.
(b) Dust and splash models providing
protection against fine dust particles or liquid splashes and impact.
(c) Welder's and cutter's models providing
protection against glare, injurious radiations, and impact.
(3) The basic designs may be modified to provide more protection against special hazards, but the modified equipment shall meet the same requirements as the basic design.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
