Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 33 - PERSONAL PROTECTIVE EQUIPMENT
EYE PROTECTORS
Section R. 408.13353 - Lenses
Universal Citation: MI Admin Code R. 408.13353
Current through Vol. 24-16, September 15, 2024
Rule 3353.
(1) Lenses intended for use in eye protectors are of 4 basic types, as follows:
(a) Clear lenses which are impact-resisting
and provide protection against flying objects.
(b) Absorptive lenses of shades 1.7 through
3.0 which are impact-resisting and provide protection against flying objects
and glare or which are impact-resisting and provide protection against flying
objects, and narrow-band spectral transmittance of injurious
radiation.
(c)
Protective-corrective lenses which are impact-resisting and either clear or
absorptive, as specified for persons requiring visual correction.
(d) Filter lenses which are impact-resisting
and provide protection against flying objects and narrow-band spectral
transmittance of injurious radiation.
(2) Glass filter lenses intended for use in eyecup goggles shall be heat treated.
(3) The height of the safety lens shall not be less than 30 millimeters.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
