Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 27 - WOODWORKING MACHINERY
PLANT LAYOUT
Section R. 408.12712 - Plant layout; floors and aisles
Universal Citation: MI Admin Code R. 408.12712
Current through Vol. 24-16, September 15, 2024
Rule 2712.
(1) An aisle for powered traffic moving in 1 direction at a time shall be not less than the width of the widest vehicle or load plus 3 feet.
(2) An aisle for powered traffic moving in 2 directions at a time shall be not less than twice the width of the widest vehicle or load plus 3 feet.
(3) Lines shall be painted on the floor, or a similar method may be used to mark an aisle.
(4) This rule applies to an aisle in a new layout after November 15, 1971.
(5) An existing aisle shall comply with this rule by January 1, 1973.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
