Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 23 - HYDRAULIC POWER PRESSES
GUARDING
Section R. 408.12355 - Hand-operated levers

Universal Citation: MI Admin Code R. 408.12355

Current through Vol. 24-16, September 15, 2024

Rule 2355.

(1) A hand lever operated press shall be equipped with a spring latch on the operating lever to prevent premature, accidental tripping.

(2) The operating lever on a hand-tripped press having more than 1 operating station shall be so interlocked as to prevent operation of the press except by concurrent action of all levers.

(3) A guard or device shall be used in conjunction with the hand-operated lever to safeguard the point of operation, or the lever shall be located so that the operator cannot reach into the point of operation.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.