Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 23 - HYDRAULIC POWER PRESSES
GUARDING
Section R. 408.12321 - Safeguarding in general at point of operation
Current through Vol. 24-16, September 15, 2024
Rule 2321.
(1) Where operator exposure exists, a press shall be equipped and operated with a point of operation guard or a point of operation protection device for every press operation performed, except where the point of operation is limited to an opening of 1/4 inch or less.
(2) One or more means of safeguarding a press operator at the point of operation shall be provided and used on a press, depending upon the method of feeding and in accordance with table 1.
(3) During die tryout, R 408.12322 to R 408.12341 and R 408.12365 do not apply.
TABLE 1
Method of Feeding Press Safeguarding Required
Slide or push feed
Sliding dies
Dial feed
Revolving dies