Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 23 - HYDRAULIC POWER PRESSES
GENERAL PROVISIONS
Section R. 408.12309 - Definitions; I to M
Universal Citation: MI Admin Code R. 408.12309
Current through Vol. 24-16, September 15, 2024
Rule 2309.
(1) "Interlocked press-barrier guard" means an enclosure which is interlocked so that the press cycle cannot be started normally unless the guard or hinged or movable sections enclose the point of operation.
(2) "Knockout" means a mechanism for releasing material from either die. A stripper or liftout is a type of knockout.
(3) "Manual feeding" means handling by an operator at each stroke of the power press the material or part being processed.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.