Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 23 - HYDRAULIC POWER PRESSES
GENERAL PROVISIONS
Section R. 408.12306 - Definitions; E

Universal Citation: MI Admin Code R. 408.12306

Current through Vol. 24-16, September 15, 2024

Rule 2306.

(1) "Ejector" means a device for removing work or material from between dies.

(2) "Electronic-control device" means a device so designed and controlled that when the operator's hand or another part of the body is within the point of operation, the press cannot be tripped, and if the hand or another part of the operator's body is inserted into the point of operation area while the slide is descending, the device shall automatically stop the slide. The device may employ active circuit elements such as vacuum tubes, gas tubes, or semiconductor amplifiers, but not magnetic amplifiers, in conjunction with passive circuit elements, such as transformers, inductors, capacitors, resistors or magnetic device operating coils.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.