Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 23 - HYDRAULIC POWER PRESSES
DESIGN, CONSTRUCTION, AND SETTING OF DIES
Section R. 408.12365 - Guide pins
Universal Citation: MI Admin Code R. 408.12365
Current through Vol. 24-16, September 15, 2024
Rule 2365. Where there is exposure to guide pins, spring enclosures or guidepin covers shall be used if the guide pins separate from the bushing more than 1/4 inch. Where dies are guarded in accordance with R 408.12321 to R 408.12324, guide-pin protection is not necessary.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
