Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 21 - POWERED INDUSTRIAL TRUCKS
LOADING SAFETY
Section R. 408.12193 - Operators; loading

Universal Citation: MI Admin Code R. 408.12193

Current through Vol. 24-16, September 15, 2024

Rule 2193. An operator shall:

(a) Operate a truck equipped with attachments as a partially loaded truck when not transporting a load.

(b) When loading a fork lift truck, place the load engaging means under the load as far as possible and tilt the mast backwards to cradle the load.

(c) Exercise caution when tilting loads especially when they are segmented.

(d) Lift or transport only a load that is within the rated capacity of the truck.

(e) Lift or transport only a load that cannot fall out of a basket or container, or off the load engaging means during the normal movements of the truck.

(f) Tilt an elevated load forward only when in a deposit position over a rack or stack.

APPENDIX

TYPES OF TRUCKS

Figure for 408.12193 (1 of 5)

Click Here To View Image

Click Here To View Image

Figure for 408.12193 (2 of 5)

Click Here To View Image

Click Here To View Image

Figure for 408.12193 (3 of 5)

Click Here To View Image

Click Here To View Image

Figure for 408.12193 (4 of 5)

Click Here To View Image

Click Here To View Image

Figure for 408.12193 (5 of 5)

Click Here To View Image

Click Here To View Image

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.