Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 1a - ABRASIVE WHEELS
GENERAL PROVISIONS
Section R. 408.10114 - Work rests

Universal Citation: MI Admin Code R. 408.10114

Current through Vol. 24-16, September 15, 2024

Rule 114.

(1) An off hand grinder shall be equipped with either a work rest so located that the point of grinding is on a horizontal plane with the wheel spindle, or a device which shall prevent the work piece from jamming between the abrasive wheel and the wheel guard. Where a work rest or device is used at a height other than the horizontal plane with the spindle, a warning sign shall be installed to prohibit use of the grinder for other than the job for which the work rest or device was set.

(2) A work rest shall be adjusted and maintained to within 1/8 inch of the abrasive wheel. The adjustment shall be accomplished when the abrasive wheel is at rest.

(3) A work rest shall be designed and constructed of metal capable of supporting the work piece.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.