Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 1a - ABRASIVE WHEELS
GENERAL PROVISIONS
Section R. 408.10111 - Handling and storage of abrasive wheels
Universal Citation: MI Admin Code R. 408.10111
Current through Vol. 24-16, September 15, 2024
Rule 111.
(1) An abrasive wheel shall not be dropped, bumped, or rolled.
(2) An abrasive wheel shall be stored in a rack, bin, box, or drawer in a manner to prevent damage to the wheel.
(3) An abrasive wheel shall be disbursed on a first-in first-out basis.
(4) An abrasive wheel shall not be stored subject to:
(a) Exposure to high humidity, water, or
other liquids.
(b) Freezing
temperatures, or any temperature low enough to cause condensation on the wheel
when moving it from storage to an area of higher temperature.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
