Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 1a - ABRASIVE WHEELS
GENERAL PROVISIONS
Section R. 408.10102 - Definitions; A to C

Universal Citation: MI Admin Code R. 408.10102

Current through Vol. 24-16, September 15, 2024

Rule 102.

(1) "Abrasive wheel-wheel" means a cutting tool that consists of abrasive grains held together by a bonding material.

(2) "Blotter" means a flat disc of compressible material that is used to cushion the area of a grinding wheel coming in contact with a flange.

(3) "Centerless O.D. grinding" means the precision grinding of the outer surface of any cylindrical workpiece which is rotated by a regulating wheel and supported by a work blade.

(4) "Concrete sawing" means the cutting or slotting of materials such as concrete or asphalt where the sawing machine rides upon the surface being sawed.

(5) "Contour grinding" means a grinding operation in which the grinding wheel or part follows a machine-generated contour.

(6) "Cutting off" means the slicing or parting of any material or part.

(7) "Cylindrical O.D. grinding" means the precision grinding of the outer surface of any cylindrical workpiece which is supported at one or both ends.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.