Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 18 - OVERHEAD AND GANTRY CRANES
CONSTRUCTION, INSTALLATION AND EQUIPMENT
Section R. 408.11832 - Trolley stops
Universal Citation: MI Admin Code R. 408.11832
Current through Vol. 24-16, September 15, 2024
Rule 1832.
(1) Stops shall be provided at the limits of travel of the trolley.
(2) The stops shall be fastened to resist the forces applied when contacted.
(3) A stop engaging the tread of the wheel shall be of a height not less than that of the wheel radius. A stop which engages other parts of the crane is preferable.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
