Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 14 - CONVEYORS
SPECIFIC CONVEYORS
Section R. 408.11451 - Slat conveyors
Universal Citation: MI Admin Code R. 408.11451
Current through Vol. 24-16, September 15, 2024
Rule 1451.
(1) A slat conveyor with the slat spaced 1 inch or more apart and moving at floor level or in work areas shall have a solid smooth bed under the slats to prevent a shear hazard.
(2) A slat conveyor with slats more than 1/4 inch, but less than 1 inch apart, and moving at floor level or in a work area shall not have any nip point less than 4 inches below the slats.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
