Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 11 - POLISHING, BUFFING & ABRADING
Section R. 408.11131 - Operations
Universal Citation: MI Admin Code R. 408.11131
Current through Vol. 24-16, September 15, 2024
Rule 1131.
(1) Buffing or polishing shall be performed on the off side.
(2) Buffing compound, when applied to a revolving wheel, shall be applied to the off side.
(3) The wheel speed shall not exceed the manufacturer's recommended revolutions per minute.
(4) Coated abrasives shall be run according to the direction (->) indicated by the manufacturer.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
