Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 11 - POLISHING, BUFFING & ABRADING
Section R. 408.11123 - Illumination
Universal Citation: MI Admin Code R. 408.11123
Current through Vol. 24-16, September 15, 2024
Rule 1123.
(1) Automatic polishing and buffing machinery and equipment shall be located with respect to sources of natural light so that light of 25 footcandles intensity will fall on the loading and unloading area. When natural light is insufficient to meet this requirement, artificial light shall be provided.
(2) Hand polishing and buffing machinery and equipment shall be located with respect to sources of natural light so that light of 30 footcandles intensity will fall on the work. When natural light is insufficient to meet this requirement, artificial light shall be provided.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
