Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 11 - POLISHING, BUFFING & ABRADING
Section R. 408.11111 - Operator personal protection
Universal Citation: MI Admin Code R. 408.11111
Current through Vol. 24-16, September 15, 2024
Rule 1111. An operator shall:
(a) Be provided with and use eye protection, as prescribed in Part 33.Personal Protective Equipment, being R 408.13301 et seq. of the Michigan Administrative Code, such as goggles or a face shield when polishing, buffing, or abrading.
(b) Be provided with, at no expense, and use a belly pad or apron when hand buffing.
(c) Not wear loose clothing.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
