Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 1 - General Provisions
Section R. 408.10012 - Employee responsibilities
Universal Citation: MI Admin Code R. 408.10012
Current through Vol. 24-16, September 15, 2024
Rule 12. An employee shall comply with all of the following:
(a) Not operate a machine or equipment until trained in the operating procedures, hazards, and safeguards and has been assigned to do so by the employer.
(b) Report to the supervisor any recognized hazard.
(c) Use required personal protective equipment or devices as prescribed in this standard or a MIOSHA specific standard.
(d) Not remove a guard or other safety device except for authorized servicing purposes. The guard or other safety device shall be replaced or equivalent guarding provided before the machine or equipment is returned to normal operation.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.