Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 7 - WELDING AND CUTTING GENERAL PROVISIONS
Section R. 408.40711 - Employer and employee responsibilities
Universal Citation: MI Admin Code R. 408.40711
Current through Vol. 24-16, September 15, 2024
Rule 711.
(1) An employer shall do all of the following:
(a)
Assure that each employee has received safety training in the use of equipment
for welding operations and instruction in the rules of this part before
allowing the employee to use the equipment.
(b) Assure that an employee in charge of the
operation of oxygen or fuel gas supply equipment or of oxygen or fuel gas
systems is instructed and judged competent for this work by the employer before
being left in charge. Rules and instructions covering the operation and
maintenance of oxygen or fuel gas distribution piping systems shall be readily
available.
(2) Welding operations shall not be permitted in the following situations:
(a) In an area not authorized by the building
or structure occupant.
(b) In a
sprinklered building while the sprinkler system is impaired, unless a fire
watch is provided.
(c) In the
presence of a potentially explosive atmosphere, such as mixtures of flammable
gases, vapors, liquids, or dusts with air.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.