Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 7 - WELDING AND CUTTING GENERAL PROVISIONS
Section R. 408.40706 - Definitions; D to N

Universal Citation: MI Admin Code R. 408.40706

Current through Vol. 24-16, September 15, 2024

Rule 706.

(1) "DC" means direct current.

(2) "Fire resistance" means the property of a material or assembly to withstand fire or give protection from it.

(3) "Fuel gas" means a gas, such as acetylene and propane, that is used to generate heat to perform a welding operation.

(4) "Gas welding" means a process for joining metals by heating with a gas flame with or without the use of pressure and with or without the use of a filler material.

(5) "Inert gas" means argon, carbon dioxide, helium, or nitrogen gas.

(6) "Manifold" means an assembly of pipe and fittings to interconnect either single or multiple sources of fuel gas or oxygen to single or multiple outlets.

(7) "Noncombustible" means having properties that do not support combustion.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.