Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 7 - WELDING AND CUTTING GENERAL PROVISIONS
HOSES AND REGULATORS
Section R. 408.40732 - Regulators and protective devices
Universal Citation: MI Admin Code R. 408.40732
Current through Vol. 24-16, September 15, 2024
Rule 732.
(1) The use of regulators shall comply with the following requirements:
(a) Regulators shall be used only for the gas
and pressure for which they are intended.
(b) Regulators shall be repaired by
authorized and trained personnel or shall be returned to the supplier for
calibration or repairs.
(c)
Regulators shall not be removed until the cylinder valve is closed and the
regulator drained.
(d) Regulators
shall have gauges marked "Use No Oil" when used for oxygen.
(2) Backflow prevention devices shall be installed on the fuel gas and oxygen hoses.
(3) A cylinder equipped with a shutoff valve shall have a regulator attached to the cylinder valve or manifold during use.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
