Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 7 - WELDING AND CUTTING GENERAL PROVISIONS
GENERAL FIRE RULES
Section R. 408.40762 - Welding drums, barrels, tanks, or other containers
Current through Vol. 24-16, September 15, 2024
Rule 762.
(1) Welding operations shall not be performed on drums, barrels, tanks, or other containers until they have been cleaned of all flammable, combustible, or toxic materials or fumes.
(2) All pipelines or other connections to drums, barrels, or tanks shall be disconnected or blanked before performing welding operations.
(3) Hollow spaces or cavities shall be vented and either filled with water or purged with an inert gas before preheating, cutting, or welding.
(4) An opening shall be maintained during welding and cutting to vent gases or vapors.
(5) Welding on natural gas pipelines shall be as prescribed by the regulations of the department of transportation, 49 C.F.R. Part 192, "Minimum Federal Safety Standards for Gas Pipelines," which are adopted by reference in R 408.40709.
