Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 19 - TOOLS
Section R. 408.41977 - Metalworking machinery or equipment; maintenance and lubrication
Universal Citation: MI Admin Code R. 408.41977
Current through Vol. 24-16, September 15, 2024
Rule 1977. Any of the following methods shall be used to lubricate metalworking machinery or equipment:
(a) Manual lubrication when the machine can be shut off and locked out.
(b) The use of an automatic pressure or gravity feed system.
(c) The use of an extension pipe leading to an area outside guards or away from any hazard.
(d) The use of a means which would provide equal or greater protection to the employee than the methods specified in subdivisions (a), (b), or (c) of this subrule.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
