Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
Construction Safety and Health Standard
Part 19 - TOOLS
Section R. 408.41944 - Powder-actuated tool testing and servicing
Universal Citation: MI Admin Code R. 408.41944
Current through Vol. 24-16, September 15, 2024
Rule 1944.
(1) A powder-actuated tool shall be tested each day before loading to see that safety devices are in proper working order.
(2) The method of testing shall be pursuant to the manufacturer's recommended procedure.
(3) A powder-actuated tool owner shall have the tool serviced and inspected at regular intervals by competent service personnel and shall not permit the tool to be altered or repaired, except by competent repair people.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
