Michigan Administrative Code
Department - Environmental Quality
Air Quality Division
Part 2 - AIR USE APPROVAL
Section R. 336.1286 - Permit to install exemptions; plastic processing equipment

Universal Citation: MI Admin Code R. 336.1286

Current through Vol. 24-04, March 15, 2024

Rule 286.

(1) This rule does not apply if prohibited by R 336.1278 and unless the requirements of R 336.1278a have been met.

(2) The requirement of R 336.1201(1) to obtain a permit to install does not apply to any of the following:

(a) Plastic extrusion, rotocasting, and pultrusion equipment and associated plastic resin handling, storage, and drying equipment.

(b) Plastic injection, compression, and transfer molding equipment and associated plastic resin handling, storage, and drying equipment.

(c) Plastic blow molding equipment and associated plastic resin handling, storage, and drying equipment if the blowing gas is 1 or more of the following gasses:
(i) Air.

(ii) Nitrogen.

(iii) Oxygen.

(iv) Carbon dioxide.

(v) Helium.

(vi) Neon.

(vii) Argon.

(viii) Krypton.

(ix) Xenon.

(d) Plastic thermoforming equipment.

(e) Reaction injection molding (open or closed mold) and slabstock/casting equipment.

(f) Plastic welding.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.