Code of Massachusetts Regulations
780 CMR - STATE BOARD OF BUILDING REGULATIONS AND STANDARDS
Chapter 8 - Interior Finishes
Section 806 - DECORATIVE MATERIALS AND TRIM [F]
Subsection 806.6 - Interior floor-wall base
Universal Citation: 780 CMR MA Code of Regs 806.6
Current through Register 1531, September 27, 2024
Interior floor-wall base that is 6 inches (152 mm) or less in height shall be tested in accordance with Section 804.2 and shall not be less than Class II. Where a Class I floor finish is required, the floor-wall base shall be Class I. [F]
Exception: Interior trim materials that comply with Section 806.5.
Disclaimer: These regulations may not be the most recent version. Massachusetts may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
