Code of Massachusetts Regulations
523 CMR - STATE ATHLETIC COMMISSION (FORMERLY, STATE BOXING COMMISSION)
Title 523 CMR 12.00 - Facilities, Equipment, And Supplies
Section 12.08 - Requirements for Boxing or Kickboxing Ring
Current through Register 1531, September 27, 2024
A boxing or kickboxing ring must meet the following requirements:
(1) The ring must be 20 feet square within the ropes. The ring floor must extend at least 18 inches beyond the ropes. The ring floor must be padded with ensolite or another similar closed-cell foam. Padding must extend beyond the ring ropes and over the edge of the platform, with a top covering of canvas, duck or similar material tightly stretched and laced to the ring platform. Material that tends to gather in lumps or ridges must not be used.
(2) The ring platform must not be more than five feet above the floor of the building and must have suitable steps for the use of the unarmed combatants. Ring posts must be made of metal, not more than three inches in diameter, extending from the floor of the building to a height of 58 inches above the ring floor. Ring posts must be at least 18 inches away from the ring ropes.
(3) There must be four ring ropes, not less than one inch in diameter and wrapped in soft material. The lower rope must be 18 inches above the ring floor.
(4) Except as otherwise provided in 523 CMR 12.08(5), there must not be any obstruction or object, including, without limitation, a triangular border, on any part of the ring floor.
(5) There may be one or two triangular borders on the ring apron under the following conditions: