Code of Massachusetts Regulations
522 CMR - BOARD OF BOILER RULES
Title 522 CMR 1.00 - General Provisions
Section 1.03 - Standards Adopted

Universal Citation: 522 MA Code of Regs 522.1
Current through Register 1531, September 27, 2024

The standards listed in 522 CMR 1.03 are adopted and hereby incorporated as part of 522 CMR. Boilers and Pressure Vessels subject to 522 CMR shall be constructed in accordance with the ASME standards or other recognized engineering standards in effect at the time of the manufacture. References to the external standards throughout 522 CMR shall be to the specific external standards adopted in 522 CMR 1.03, unless otherwise clearly stated.

ANSI/ASHRAE

15-2019 Safety Standard for Refrigeration Systems

34-2019 Designation and Safety Classification of Refrigerants

ANSI/IIAR

1-2017 Definitions and Terminology Used in IIAR Standards

2-2021 American National Standard for Design of Safe Closed-Circuit Ammonia Refrigeration Systems

4-2020 American National Standard for Installation of Closed-Circuit Ammonia Refrigeration Systems

6-2019 Inspection, Testing, and Maintenance of Closed Circuit Ammonia Refrigeration Systems

ASME Code for Pressure Piping, B31

B31.1-2020 Power Piping

B31.3-2018 Process Piping

B31.5-2019 Refrigeration Piping and Heat Transfer Components

B31.9-2020 Building Service Piping

ASME Boiler and Pressure Vessel Code, 2019

Section I - Rules for Construction of Power Boilers

Section II - Materials

* Part A - Ferrous Materials Specifications

* Part B - Nonferrous Materials Specifications

* Part C - Specifications for Welding Rods Electrodes and Filler Metals

* Part D - Properties

Section III - Rules for Construction of Nuclear Facility Components

Section IV - Rules for Construction of Heating Boilers

Section VIII - Rules for Construction of Pressure Vessels

Section IX - Welding and Brazing Qualifications

Section X - Fiber-reinforced Plastic Pressure Vessels

Section XI - Division 1 Rules for In-service Inspection of Nuclear Power Plant Components

ASME CSD-1-2018 Controls and Safety Devices for Automatically Fired Boilers

Part CG: General

Part CM: Testing and Maintenance

Part CW: Steam and Waterside Control

National Board Inspection Code, 2019 Edition

* Part 1 - Installation

* Part 2 - Inspection

* Part 3 - Repairs and Alterations

* Part 4 - Pressure Relief Devices

NFPA 85 Boiler and Combustion Systems Hazards Code - 2019 Edition

References to the external standards throughout 522 CMR shall be to the specific external standards adopted in 522 CMR 1.03, unless otherwise clearly stated.

Disclaimer: These regulations may not be the most recent version. Massachusetts may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.