Code of Massachusetts Regulations
521 CMR - Architectural Access Board
Title 521 CMR 36 - DRINKING FOUNTAINS
Section 36.3 - SPOUT LOCATION
Universal Citation: 521 CMR 36 MA Code of Regs 36.3
Current through Register 1531, September 27, 2024
The spouts of drinking fountains and water coolers shall comply with the following:
36.3.1 Spouts shall be located at the front of the unit and shall direct the water flow in a trajectory that is parallel or nearly parallel to the front of the unit.
36.3.2 The spout shall provide a flow of water at least four inches (4" = 102mm) high to allow the insertion of a cup or glass under the flow of water.
36.3.3 On an accessible drinking fountain with a round or oval bowl, the spout must be positioned so the flow of water is within three inches (3" = 76mm) of the front edge of the fountain.
Disclaimer: These regulations may not be the most recent version. Massachusetts may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
