Code of Massachusetts Regulations
521 CMR - Architectural Access Board
Title 521 CMR 24 - RAMPS
Section 24.4 - LANDINGS

Current through Register 1531, September 27, 2024

Ramps shall have landings for turning and resting. At a minimum, landings shall be located at the bottom and the top of each ramp and each ramp run, and whenever a ramp changes direction. The maximum length of a ramp run between landings shall not exceed 30 feet (30' = 9m). Landings shall have the following features: See Fig. 24c.

Click to view image

24.4.1 General: Landings shall be level and unobstructed by projections and door swings, except as permitted by 521 CMR 24.4.6.

24.4.2 Width: The landing shall be at least as wide as the ramp run leading to it.

24.4.3 Length: The landing length shall be a minimum of 60 inches (60" = 1524mm) clear.

24.4.5 Dimensions for turning: If ramps change direction at landings, the minimum landing size shall be 60 inches by 60 inches (60" by 60" = 1524mm by 1524mm). See Fig. 24c.

24.4.6 Doorways at Landings: If a doorway is located at a landing, then the level area in front of the doorway shall also comply with maneuvering clearances in Fig. 26d and 26e.

Disclaimer: These regulations may not be the most recent version. Massachusetts may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.