Code of Massachusetts Regulations
521 CMR - Architectural Access Board
Title 521 CMR 24 - RAMPS
Section 24.2 - SLOPE AND RISE

Current through Register 1531, September 27, 2024

Ramps shall have the least possible slope.

24.2.1 The least possible slope should be used for any ramp. The maximum slope of a ramp shall be 1:12 (8.3%). (There is no tolerance allowed on slope, Refer to 521 CMR 2.4.4d)

24.2.2 The maximum rise for any run shall be 30 inches (30" = 762mm). See Fig. 24a.

Click to view image

Exceptions: A slope between 1:10 (10%) and 1:12 (8.3%) is allowed for a single rise of a maximum three inches (3" = 76mm).

Disclaimer: These regulations may not be the most recent version. Massachusetts may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.