(1) A
Release Abatement Measure Plan shall not be considered complete, unless it
contains, at a minimum, the following:
(a) the
name, address, telephone number and relationship to the site of the person
assuming responsibility for conducting the Release Abatement Measure;
(b) a description of the release or threat of
release, site conditions and surrounding receptors;
(c) the objective(s), specific plan(s) and
proposed implementation schedule for the Release Abatement Measure, including,
as appropriate, descriptions, plans and/or sketches of the site, any proposed
structures to be constructed or installed in the project area, and any proposed
investigative and/or remedial installations;
(d) a statement as to whether Remediation
Waste, Remedial Wastewater and/or Remedial Additives will be excavated,
collected, stored, treated, discharged, applied, reused or otherwise managed at
the site;
(e) where appropriate, a
proposed environmental monitoring plan for implementation during and/or after
the Release Abatement Measure;
(f)
a listing of federal, state and/or local permits likely to be needed to conduct
the Release Abatement Measure;
(g)
the seal and signature of the Licensed Site Professional who prepared the
Release Abatement Measure Plan;
(h)
the certification required at
310
CMR 40.0442(5), if greater
than 1500 cubic yards of Remediation Wastes are to be generated and managed at
the disposal site; and
(i) any
other information that the Department, during its review and evaluation of the
Release Abatement Measure Plan, determines to be necessary to complete said
plan, in view of site specific circumstances and conditions.
(2) All Release Abatement Measure
Plans submitted to the Department prior to Tier Classification of the disposal
site shall be accompanied by the appropriate fee established in
310 CMR
4.00: Timely Action Schedule and Fee
Provisions. No fee is required for Release Abatement Measure Plans
submitted to the Department after Tier Classification of the disposal site or
after submittal of a Permanent Solution Statement for the disposal
site.
(3) Release Abatement Measure
Plans shall be submitted to the Department using a transmittal form established
by the Department for such purposes.
