Current through Register 1531, September 27, 2024
(1)
Use of Permit Procedure at
310
CMR 19.032
. The permit
procedure set forth at
310
CMR 19.032 shall be used to review the
following:
(a) an application for a new
facility;
(b) an application for
expansion of a handling facility, including a transfer station;
(c) an application for expansion of a
combustion facility;
(d) an
application for lateral expansion of a landfill;
(e) an application for vertical expansion of
a landfill; or
(f) any other
application the Department deems appropriate.
(2)
Use of Permit Procedure at
310
CMR 19.033
. Except as specified
at 310 CMR 19.029(3) or (4) the permit procedure set forth at
310
CMR 19.033 shall be used to review the
following:
(a) an application for a permit
modification;
(b) an application
for corrective action (including but not limited to assessment);
(c) a closure plan;
(d) a post-closure plan;
(e) an application for post-closure use on
the final cover of a landfill or affecting an appurtenance of a
facility;
(f) an application for a
Beneficial Use Determination; or
(g) any other application the Department
deems appropriate.
(3)
Use of Presumptive Approval Procedure at
310 CMR
19.034
. Except as specified at
310 CMR 19.029(2) and (4) the presumptive approval procedure set forth at
310 CMR
19.034 shall apply to the following proposed
activities or modifications:
(a) any
administrative change at a facility;
(b) a post-closure use that:
1. does not affect the facility's
appurtenances, or
2. is not located
on the final cover of a landfill;
(c) acceptance of a special waste pursuant to
310 CMR
19.061;
(d) a minor operational or equipment change,
such as, but not limited to, a change, substitution, or addition of processing
equipment (e.g. diesel to electric) or a change in the
facility's layout; and
(e) any
other activity or modification the Department deems appropriate.
(4)
Use of
Certification Procedure at
310 CMR
19.035 for Transfer Station (That Is Not a
C&D Waste Transfer Station). The certification procedure at
310 CMR
19.035 shall be used for:
(a) the operation of a new or expanded
transfer station;
(b) the
acquisition of a transfer station (in addition to the certification required
pursuant to
310 CMR
19.044);
(c) the modification in the design,
construction, operation, maintenance, closure, or post-closure use of a
transfer station;
(d) when a
certification has not been submitted within the previous five years;
or
(e) a transfer station with a
valid permit or approval issued prior to February 14, 2014.
