Code of Maryland Regulations
Title 20 - PUBLIC SERVICE COMMISSION
Subtitle 70 - SERVICE SUPPLIED BY WATER COMPANIES
Chapter 20.70.02 - Engineering
Section 20.70.02.07 - Meters

Universal Citation: MD Code Reg 20.70.02.07

Current through Register Vol. 51, No. 6, March 22, 2024

A. Meter Installation. The utility shall furnish, install, and maintain all meters. Utilities should make available to customer's plumbers sketches of standard meter installations which show the way in which the customer's portion of the installation should be made.

B. Meter Location. The meter shall be set at a location designated by the utility on the delivery side of the curb stop, and may be inside the building or it may be outside, near the property line, in an appropriate box or vault. If the customer desires any change in the location or position of the meter, meter box, or vault, after they have been installed, the change in location shall be made by the utility at the expense of the customer.

Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.