Code of Maryland Regulations
Title 20 - PUBLIC SERVICE COMMISSION
Subtitle 55 - SERVICE SUPPLIED BY GAS COMPANIES
Chapter 20.55.07 - Metering Tests
Section 20.55.07.07 - In-Service Performance Test Program
Universal Citation: MD Code Reg 20.55.07.07
Current through Register Vol. 51, No. 6, March 22, 2024
A. Test Program. A utility in-service performance test program shall be designed to automatically adjust the number of meters required to be tested by a utility based solely on the performance of the utility's meters. In-service performance tests shall be made in accordance with the requirements of COMAR 20.55.02.02B.
B. Location of Tests. In-service performance tests may be made on the customer's premises, in the utility's shop, or in an approved meter shop.
C. Analysis of Meter Tests.
(1) By Commission. The Commission will review the annual reports of meter test results.
(2) By Utility. Each utility shall analyze its meter test results for the purpose of identifying the meter types which have poor accuracy characteristics.
Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
