Code of Maryland Regulations
Title 11 - DEPARTMENT OF TRANSPORTATION
Subtitle 19 - MOTOR VEHICLE ADMINISTRATION-SCHOOL VEHICLES
Chapter 11.19.03 - Type II School Vehicles - Construction Standards
Section 11.19.03.28 - Mirrors

Universal Citation: MD Code Reg 11.19.03.28

Current through Register Vol. 51, No. 6, March 22, 2024

A. An interior clear view mirror shall be at least 5 by 15 inches to afford a good view of the passengers and the roadway to the rear. If it is not metal backed and framed, the mirror shall be made of laminated safety glass. It shall have rounded corners and protected edges.

B. Two adjustable exterior, clear view mirrors, framed with black housing, shall be installed on each side of the vehicle.

C. Fender-Mounted Mirrors.

(1) One fender-mounted tripod or solid piece mirror bracket shall be mounted on each front fender.

(2) An exterior convex mirror shall be mounted on each front fender to provide a close infield of the vision to eliminate blind spots.

(3) A single mirror of a type approved by the Administration in conjunction with the State Department of Education may be used in place of the mirrors in §C(2) of this regulation.

Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.