Code of Maryland Regulations
Title 11 - DEPARTMENT OF TRANSPORTATION
Subtitle 19 - MOTOR VEHICLE ADMINISTRATION-SCHOOL VEHICLES
Chapter 11.19.03 - Type II School Vehicles - Construction Standards
Section 11.19.03.06 - Drive Train
Universal Citation: MD Code Reg 11.19.03.06
Current through Register Vol. 51, No. 6, March 22, 2024
A. Axles.
(1) The front axle and suspension shall be of sufficient capacity to support that portion of the load as would be imposed by the manufacturer's maximum gross vehicle weight rating.
(2) The rear suspension assembly shall have a gross weight rating equal to that portion of the load as would be imposed by the manufacturer's maximum gross vehicle weight rating.
B. Drive Shaft. Each segment of the drive shaft shall be equipped with a suitable guard to prevent accident or injury in the event of its fracture or disconnection.
Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
