Code of Maryland Regulations
Title 11 - DEPARTMENT OF TRANSPORTATION
Subtitle 14 - MOTOR VEHICLE ADMINISTRATION-VEHICLE INSPECTIONS
Chapter 11.14.06 - Emissions Equipment Standards
Section 11.14.06.03 - Fuel Filler Inlet Restrictor (INRES)
Universal Citation: MD Code Reg 11.14.06.03
Current through Register Vol. 51, No. 6, March 22, 2024
A. Vehicles originally equipped with a catalytic converter were also equipped with a fuel filler inlet restrictor to prevent the entry of a leaded fuel pump nozzle.
B. Some later model light-duty trucks were not equipped with a catalytic converter but were equipped with a fuel filler inlet restrictor. The fuel filler inlet restrictor is required on these vehicles.
| Procedures: | Reject Vehicle If: |
| (1) Inspect for presence of fuel filler inlet restrictor. | (1) Fuel filler inlet restrictor is required and is missing. |
| (2) Inspect for condition of fuel filler inlet restrictor. | (2) Inside diameter of fuel filler inlet restrictor is larger than 0.950 inch. |
Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
