Code of Maryland Regulations
Title 11 - DEPARTMENT OF TRANSPORTATION
Subtitle 14 - MOTOR VEHICLE ADMINISTRATION-VEHICLE INSPECTIONS
Chapter 11.14.03 - Safety Standards for Motorcycles
Section 11.14.03.01 - Applicability-Motorcycles

Universal Citation: MD Code Reg 11.14.03.01

Current through Register Vol. 51, No. 6, March 22, 2024

A. The standards, requirements, and procedures set forth in this chapter are applicable to equipment installed by the manufacturer or required by federal or State requirement for motorcycles and sidecars, if equipped. Questions regarding motorcycle standards or specifications shall be referred to the Automotive Safety Enforcement Division of the Maryland State Police. A person constructing or reconstructing a motorcycle shall assure that the vehicle meets or exceeds all applicable federal or State safety standards.

B. Three-wheel multipurpose vehicles having one wheel in the front and two in the rear and not having an enclosed driver or occupant compartment shall meet all established minimum standards for the front of motorcycles and all established minimum standards for the rear of four-wheel multipurpose vehicles.

Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.