Current through Register Vol. 51, No. 19, September 20, 2024
A. The
person-in-charge shall ensure that plans and specifications are submitted to
and approved by the approving authority before a food establishment is:
(1) Constructed;
(2) Remodeled; or
(3) Materially altered.
B. The person-in-charge shall ensure that the
information submitted to the approving authority includes:
(1) A scale drawing of the proposed facility
that identifies the layout and arrangement of work areas and the location of
all equipment;
(2) A description
of:
(a) Materials to be used for interior
finishes;
(b) The layout and types
of lighting to be used;
(c) The
proposed ventilation system; and
(d) Methods and facilities for trash storage
and disposal;
(3) A
plumbing diagram, including specifications of the method of sewage disposal and
the source of potable water;
(4) A
complete list of specifications for the proposed food equipment;
(5) A menu or other written description of
the foods to be prepared or served;
(6) General food handling information and
procedures for:
(a) Receiving;
(b) Storage;
(c) Thawing; and
(d) Preparation;
(7) A list of foods that will be:
(a) Prepared in advance of service;
or
(b) Distributed off
premises;
(8) A
description of the food systems that will be used, such as:
(a) Cook-hot hold-serve;
(b) Cook-cool-reheat-hot hold-serve;
and
(c) Cook-cool-cold hold-serve;
and
(9) Any other
information that is required by the approving authority to ascertain compliance
of the plans and specifications with all applicable State and local laws,
regulations, and ordinances.
C. The approving authority shall:
(1) Conduct a priority assessment of the
facility based upon the information obtained in §B of this
regulation;
(2) Classify each food
service facility as a:
(a) High priority
facility;
(b) Moderate priority
facility; or
(c) Low priority
facility;
(3) Designate
as a high priority facility, a facility that:
(a) Is a health care facility; or
(b) Serves potentially hazardous food that is
prepared:
(i) A day or more in advance of
service; or
(ii) Using food
preparation methods that require the food to pass through the temperature range
of 41°F to 135°F two or more times before service, such as cooking,
cooling, and then reheating;
(4) Designate as a moderate priority
facility, a facility that serves potentially hazardous food:
(a) That is prepared using methods that
require the food to pass through the temperature range of 41F to 135F not more
than one time before service, such as cooking, hot holding, and then serving;
or
(b) That is cut, assembled, or
packaged on the premises, such as meats; and
(5) Designate as a low priority facility, a
facility that serves:
(a) Commercially
packaged potentially hazardous foods directly to the consumer;
(b) Non-potentially hazardous food that is
cut, assembled, or packaged on the premises, such as candy, popcorn, and baked
goods; or
(c) Hand dipped ice
cream.
D.
Except for a temporary food service facility, the person-in-charge shall ensure
that a HACCP plan is submitted to the approving authority for each high or
moderate priority facility as specified in §C of this
regulation.
E. The person-in-charge
shall ensure that the HACCP plan includes the:
(1) Identification of each CCP;
(2) Critical limits for each CCP;
(3) Monitoring procedures at each
CCP;
(4) Corrective action that
will be taken if there is a loss of control at a CCP due to:
(a) Employee error;
(b) Equipment malfunction;
(c) Power failure; or
(d) Any other factor that causes loss of
control at a CCP;
(5)
Verification procedures that will ensure proper monitoring of each CCP, such
as:
(a) Calibration of cooking and holding
equipment and thermometers; and
(b)
Review of records such as temperature logs;
(6) Written procedures for employee training
in HACCP plan procedures; and
(7) A
list of the food service equipment that will be used at each CCP.
F. The person-in-charge shall
construct the HACCP plan by:
(1) Listing, for
each CCP, the:
(a) Menu items controlled by
the CCP;
(b) Equipment used;
and
(c) Monitoring, corrective
action, and verification procedures;
(2) Incorporation of the requirements of
§E of this regulation into a recipe or preparation instructions;
or
(3) Another way that meets the
requirements of §E of this regulation.