Code of Maryland Regulations
Title 10 - MARYLAND DEPARTMENT OF HEALTH
Part 1
Subtitle 07 - HOSPITALS
Chapter 10.07.14 - Assisted Living Programs
Section 10.07.14.42 - Water Supply

Universal Citation: MD Code Reg 10.07.14.42

Current through Register Vol. 51, No. 19, September 20, 2024

A. Approved Source. A facility shall be served by water from an approved public water supply. If an approved public water supply is not available, a private water supply may be accepted if it is approved by the local jurisdiction in which the program is located or a private certified vendor to be submitted with an initial or renewal licensure application.

B. Adequacy. The water supply shall be adequate in quantity and delivered under sufficient pressure to satisfactorily serve all fixtures in the facility.

C. Hot Water Temperature. Hot water accessible to residents shall be blended externally to the hot water generator, by either individual point-of-use control valves of the anti-scald or thermostatic mixing valve type, to a maximum temperature of 120°F and a minimum temperature of 100°F at the fixture.

Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.