Code of Maryland Regulations
Title 09 - MARYLAND DEPARTMENT OF LABOR
Subtitle 23 - BOARD FOR PROFESSIONAL ENGINEERS
Chapter 09.23.06 - Continuing Professional Competency Requirements
Section 09.23.06.03 - Requirements

Universal Citation: MD Code Reg 09.23.06.03

Current through Register Vol. 51, No. 19, September 20, 2024

A. A licensee shall complete

a minimum of 16 PDH units earned from the participation in and completion of qualifying programs described in Regulation .04 of this chapter as a condition of license renewal in each individual biennial licensing term.

B. A minimum of 1 PDH unit in each individual biennial licensing term shall be earned from the participation in and the completion of qualifying programs with content areas related to the following:

(1) The awareness of ethical concerns and conflicts related to the practice of engineering;

(2) An enhanced familiarity with the code of conduct for professional engineers;

(3) An understanding of standards of practice or care related to the practice of engineering; or

(4) Laws and regulations applicable to the practice of engineering in Maryland.

C. A maximum of 8 PDH units earned in excess of 16 units that are required for a license renewal during the licensing term can be carried forward to apply as credit toward the next individual licensing term.

Disclaimer: These regulations may not be the most recent version. Maryland may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.