Code of Maine Rules
06 - DEPARTMENT OF ENVIRONMENTAL PROTECTION
096 - DEPARTMENT OF ENVIRONMENTAL PROTECTION - GENERAL
Chapter 129 - SURFACE COATING FACILITIES
Section 096-129-6 - Test Methods and Compliance Procedures

Universal Citation: 06 ME Code Rules ยง 096-129-6
Current through 2024-38, September 18, 2024

The owner or operator of any surface coating unit, line or operation subject to this chapter shall collect and record the applicable information, and where required, perform compliance testing and demonstrate compliance by using the methods and procedures described in this chapter, Appendix A, Procedures A through C and Procedures E through I, and submit a report to the Department of the results as stipulated in Section 8 of this chapter. At least a thirty (30)-day advance notification to the Department shall precede all tests.

The owner or operator of a surface coating unit, line or operation subject to this chapter shall perform additional testing and submit a report within ninety (90) days of receipt of notice from the Department if equipment operating parameters, staff inspection, air monitoring or other cause indicate to the Department that the surface coating facility may be operating out of compliance with the emission limitations.

Disclaimer: These regulations may not be the most recent version. Maine may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.