Code of Maine Rules
02 - DEPARTMENT OF PROFESSIONAL AND FINANCIAL REGULATION
658 - MAINE FUEL BOARD
Chapter 110 - INSTALLATION OF SOLID FUEL BURNING EQUIPMENT
- Section 658-110-1 - SCOPE
- Section 658-110-2 - NATIONALLY RECOGNIZED TESTING LABORATORY
- Section 658-110-3 - WORKMANSHIP
- Section 658-110-4 - INSTALLATIONS
- Section 658-110-5 - REPAIR OR REPLACEMENT
- Section 658-110-6 - MAINTENANCE
- Section 658-110-7 - HEAT LOSS REQUIREMENT
- Section 658-110-8 - APPLIANCES
- Section 658-110-9 - SOLID FUEL IN GARAGES
- Section 658-110-10 - Power Failure By-Pass and Valves
- Section 658-110-11 - Air Combustion and Ventilation
- Section 658-110-12 - Electrical Wiring and Equipment
- Section 658-110-13 - INSTALLATION OF COMBINATION UNITS (SOLID FUEL/OIL/GAS)
- Section 658-110-14 - CONVERSION BURNERS
- Section 658-110-15 - WATER HEATERS
- Section 658-110-16 - LOW WATER CONTROL FOR SOLID FUEL FIRED BOILERS
- Section 658-110-17 - Safety and Pressure Relief Valves
- Section 658-110-18 - Water and SteamBoiler Pipe Supports
- Section 658-110-19 - Thermostatically-Controlled, Hand-Fired warm air Units
- Section 658-110-20 - EMERGENCY TEMPORARY REPAIR OF WARM AIR HEAT EXCHANGERS
- Section 658-110-21 - Welding of non-residential warm air Heat exchangers
Current through 2024-13, March 27, 2024
Summary: The purpose of this chapter is to specify the proper installation of solid fuel burning equipment in accordance with NFPA #211.
STATUTORY AUTHORITY: 32 MRSA §18123(2)
Disclaimer: These regulations may not be the most recent version. Maine may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.