Code of Maine Rules
02 - DEPARTMENT OF PROFESSIONAL AND FINANCIAL REGULATION
385 - MANUFACTURED HOUSING BOARD
Chapter 900 - USED MANUFACTURED HOME INSTALLATION STANDARD
Appendix 385-900-A

Universal Citation: 02 ME Code Rules ยง 385-900-A
Current through 2024-38, September 18, 2024

I. Roof Load Zones

A. 40 psf (North) Roof Load Zones

The following counties are deemed to be within the 40 psf roof load zone:

1. Washington, Hancock, Aroostook, Somerset, Waldo, Knox, Penobscot, and Piscataquis.

B. 30 psf (Middle) Roof Load Zones

The following counties are deemed to be within the 30 psf roof load zone:

1. York, Cumberland, Kennebec, Sagadahoc, Lincoln, Franklin, Oxford and Androscoggin.

II. Wind Zones

A. Wind Zone I

The following counties are deemed to be within Wind Zone I:

1. Aroostook, Somerset, Waldo, Franklin, Penobscot, Oxford, Piscataquis, York, Cumberland, Kennebec, Sagadahoc, Knox, Lincoln, and Androscoggin.

B. Wind Zone II...100 mph

The following counties are deemed to be within Wind Zone II:

1. Hancock and Washington.

III. Installation Zones

A. Sites prepared in Washington, Hancock, Aroostook, Somerset, Waldo, Knox, Penobscot, and Piscataquis counties require 24 inches of compacted fill.

B. Sites prepared in York, Cumberland, Kennebec, Sagadahoc, Lincoln, Franklin, Oxford and Androscoggin counties require 18 inches of compacted fill.

Disclaimer: These regulations may not be the most recent version. Maine may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.