Code of Maine Rules
02 - DEPARTMENT OF PROFESSIONAL AND FINANCIAL REGULATION
385 - MANUFACTURED HOUSING BOARD
Chapter 890 - MANUFACTURED HOME INSTALLATION STANDARDS
Subchapter J - ADDITIONAL REQUIREMENTS
Section 385-890-J-I - General

Current through 2024-38, September 18, 2024

A. Exemption

Manufactured homes, which are installed in compliance with these standards, are exempt from all state or political subdivision codes, standards or regulations covering the same matters.Other matters are under the authority of the LAHJ.

B. Alterations to the home by a licensed mechanic are prohibited.

C. Installation of Onsite Structures

Onsite structures attached to the home shall be installed according to the home manufacturer's installation instructions or be designed and approved by a registered engineer or registered architect.

Onsite structures which support their own live load and dead loads and are not attached to the home are not covered by this standard and come under the authority of the LAHJ.

D. The home must be installed and leveled by a licensed mechanic.

E. The home shall be leveled so that all doors and windows operate as intended and plumbing drains function in a safe and sanitary manner.

Disclaimer: These regulations may not be the most recent version. Maine may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.